- This topic has 21 replies, 5 voices, and was last updated 15 years, 2 months ago by Munch.
3 Hole Mod Video
-
AuthorPosts
-
January 21, 2009 at 12:09 am #2478Sangria7Participant
I dont have a before video unfortunately. I only have this after video using my wife’s pink video camera
Still sounds wimpy but better than before. The holes are 3/8 inch but I was thinking of making them 1/2 inch for more sound output.Meh – it will have to do until I get my V&H Cruzer pipes with tax return LOL
January 21, 2009 at 12:31 am #15866Sangria7ParticipantYea – its a poor mans mod
Maybe you can record the sound bit on a digital sound recorder then dub it over the video?
January 22, 2009 at 3:51 am #15886AtlusParticipantDamn I should do this to my bike (just got a gz250 today!) Do I need to take off the muffler to actually drill or can I do it with the bike standing?
January 22, 2009 at 1:08 pm #15906Sangria7ParticipantYou can drill through while bike is standing. Just make sure your drillbits are titanium and you have at least a 12 V drill with 500lbs torque or else it will not drill through.
You will need to drill through the outer exhaust shell then through the baffle.
You will want to hold the exhaust with one hand as you drill. I actually found it easier to drill after the bike has been running since the metal is “softer” when hot. But then again you can burn yourself. Either way becareful – you’ll find a lot of metal shavings come off and I even broke two of my titanium drill bits.
January 22, 2009 at 1:10 pm #15907Sangria7ParticipantBefore I forget – also you will need to start with an 1/8 inch drill bit working your way up to 3/8 inch.
It is like 4 different bits total…
January 23, 2009 at 12:05 am #15923MunchParticipantWish I could do something like this…. after warranty runs out. However the 900 is equipped with a catalytic converter of sorts and I am not willing to risk a $50k federal fine. So…. I will just have to listen to everyone elses.
January 23, 2009 at 1:39 am #15926Sangria7ParticipantWhat? $50K fine..damn.
January 23, 2009 at 2:56 am #15930AtlusParticipantwait, is that fine for any bike with the holes or just the 900? Could I get fined for putting it on a gz250?
January 23, 2009 at 3:16 am #15932MunchParticipantAnything fitted with a catalytic converter. Federal EPA law. If your not sure wether or not you have one…may want to look in your MoM.
January 23, 2009 at 4:44 am #15933MunchParticipantactually…… I need to check for MC’s but I know for automotive…if it came factory…it had best have one on there. Which BTW is alot of the reason MC manufacturers are having to redo their whole line.
January 23, 2009 at 4:04 pm #15939Sangria7ParticipantSo is there a CC size where there are Cat-Converters on bikes? Or are they just in required states?
January 23, 2009 at 4:43 pm #15941AtlusParticipantSo basically this is illegal no matter how I go about it…ughhh but god I really want a deeper sound on my bike, it’s so…eh haha.
If you do find out the legal consequences/fines let me know! I really got to weigh those in before I do this ; )January 23, 2009 at 5:10 pm #15942Sangria7ParticipantI know I dont have a cat-converter in my pipes so I am good
January 24, 2009 at 12:03 am #15957MunchParticipantFound some information….will post it in the “Laws” section.
January 24, 2009 at 1:56 am #15967megaspazParticipantMoved to vids and pics and embedded youtube movie.
-
AuthorPosts
- You must be logged in to reply to this topic.