- This topic has 25 replies, 9 voices, and was last updated 15 years, 7 months ago by smokeizfire.
2nd and 3rd round of mods.
-
AuthorPosts
-
August 1, 2008 at 12:31 am #9732BoOZe P-ti MotardParticipant
what are your future projects on this bike?
bluewhile halogen lamps?neon underneath or at the back tyre or evrywhere ;p or k&n air filter ;p or Nos …wahaha
hey yeah btw is your air filter stock or aftermarket? coz you put Xzhost (two bro but only one is seen..well 1st time i saw two bro exhaust was on a fzr fazer,so you know..) and you know the rest…BoOZe
Solomolo RiderAugust 1, 2008 at 4:26 am #9752AndrewParticipantHow do you like the Pazzo levers? Did you install them yourself?
AndrewAugust 1, 2008 at 5:55 am #9753megaspazParticipantI like them a lot. They feel really good. I had them installed at a local shop. cost 25 bucks to have them installed.
—
If there’s anything more important than my ego
around, I want it caught and shot now…August 1, 2008 at 5:55 am #9754megaspazParticipantNot a clue what’s next. Anything else i might do would probably be cosmetic. Still using the stock air filter, it works just fine… at least at this point in time.
—
If there’s anything more important than my ego
around, I want it caught and shot now…August 1, 2008 at 1:37 pm #9757AndrewParticipantI have small hands so I’ll be looking for adjustable levers on a bike but it looks like the 250’s don’t usually come with that and I’ll need an after market part.
Andrew
August 1, 2008 at 2:14 pm #9759BuddParticipantI have heard that the adjustable ninja 500 levers work on the 250.
“I am the best there is at what I do, and what I do ain’t nice.”-Wolverine
August 1, 2008 at 5:53 pm #9770MattParticipantZZR-250 has adjustible levers – they should fit (and may in fact be the same ones as the Ninja 500 uses, since the ZZR-250 is basically a last gen Ninja 250R with a bunch on Ninja 500 suspension bits thrown in).
—
The problem with the internet: Everyone gets the same font size.August 30, 2008 at 8:21 pm #11448BankParticipantBeautiful bike man
August 31, 2008 at 2:51 am #11467AndrewParticipantWas that triple-t crown protector an OEM part. I asked my local dealer about one for my Ninja and they said there wasn’t one.
August 31, 2008 at 3:13 am #11468megaspazParticipantIt’s an OEM suzuki sv650s part. Dun know what OEM stuff they have for kawa’s… But if the dealer says kawa doesn’t make ’em, I’d be inclined to believe it… tempered with a google search that is…
—
If there’s anything more important than my ego
around, I want it caught and shot now…September 2, 2008 at 9:13 pm #11576smokeizfireParticipantAnd I don’t even eat sports bikes.
HE WHO DIES WITH THE MOST TOYS WINS
-
AuthorPosts
- You must be logged in to reply to this topic.